Spring Cone crusher

is suitable to crush various kinds of ores and rocks of medium or above medium hardness,and the spring cone crusher is of stable structure, high efficiency, easy adjustment, and use economically, etc.

The Cone crusher is widely applied in metallurgical, construction, road building, chemical and phosphatic industry. Spring Cone crusher is suitable for hard and mid-hard rocks and ores, such as iron ores, copper ores, limestone, quartz, granite, grit stone, etc. Type of the crushing cavity is decided by the application of the ores. Standard type is for PYZ (secondary crush); middle type is for PYD (tertiary crush); short-head type is for primary and secondary crush.

The

spring cone crusher

consists of frame, transmission device, and hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening.

During operation, the motor drives the eccentric shaft shells to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.

• The crusher machine is of high productivity and high quality;
• Less machine stop time;
• Easy maintenance and low cost;
• Unique crushing ability in primary, secondary and tertiary crushing;
• The spring safety system of the cone crusher acts as an overloading protection system that allows metals to pass through the crushing chamber so as not to damage the

  spring cone crusher

  .
• The crusher machine is suitable for hard and mid-hard rocks and ores, such as iron ores, copper ores, limestone, quartz, granite, grit stone, etc.

Model		weight (T)	power	diameter of cone crusher at big end(mm)	max feeding size	adjustment range of discharge opening	capacity (t/h)
PYB	900	11.2	55	Ф900	115	15-50	60-105
PYZ				Ф900	60	5-20	50-90
PYD				Ф900	50	3-13	15-50
PYB	1200	35	130	Ф1200	145	20-50	110-168
PYZ				Ф1200	100	8-25	42-135
PYD				Ф1200	50	3-15	18-105
PYB	1750	50.3	160	Ф1750	215	25-50	280-480
PYZ		50.3		Ф1750	185	10-30	115-320
PYD		50.2		Ф1750	85	5-13	75-230
PYB	2200	80	260 280	Ф2200	300	30-60	590-1000
PYZ				Ф2200	230	10-30	200-580
PYD				Ф2200	100	5-15	125-350

Note: This specification is just reference, any changes are subject to the

Spring Cone crusher

products